200kHz Sweepable Function Generator

This multiple wave form signal generator is ideal for your electronics lab. It produces precision sine, square, or triangle wave forms. Use the unit in a variety of lab applications, including audio experiments, AC circuit studies, wave form experiments, and electronic circuitry testing. For 110 VAC, 60Hz.

• 2 distinct and separate outputs: 1 variable and 1 fixed at TTL levels (capable of driving 10 standard TTL loads)
• Variable output with short-circuit protection
• Signals at the variable output are symmetrical around ground with the variable DC offset control off
• DC coupled output
• 600-ohm output impedance
• VCO and sweep capabilities
• 0.2Hz–200kHz frequency range

Includes instruction manual.

Size: 7.5cm x 24.5cm x 18.5cm.

Specifications:

Variable (function) Output

• Impedance: Constant 600O5%, short circuit proof
• Amplitude: 4 Selectable ranges: 1mV–10mVp-p; 10mV– 100mV; 100mV–1Vp-p; 1V–10Vpp (open circuit)
• DC offset: Zero when feature is not selected, variable -5VDC to +5 VDC into open circuit when selected. The total AC (signal) plus DC (offset) output is limited to±10Vp-p into open circuit and ±Vp-p into 600O.
• TTL output: Standard TTL-level square wave (in all modes), buffered to drive 10 TTL loads. The rise/fall time is less than 25ns, and synchronous with variable outputs.
• Sweep Input: DC coupled, BNC connector
• Impedance: 30kO
• Sensitivity: 0 to ±10V input sums with voltage at frequency vernier to sweep output frequency up to 100:1; linear sweep range in 10:1, maximum in ±12V
• Modes: Frequency range in all modes is 0.2Hz to 200kHz, set with a continuously variable 10:1 frequency vernier and marked in 45 steps and 6 decade ranges. The dial is calibrated to ±5% of setting at 10Hz, 100Hz, 1kHz, and 10kHz.
• Square: Sine: .1% THD typical; calibrated to <2% up to 100 kHz.
• Triangle: Better than 1% linearity.

Email this Product to a Colleague